taylor neck shim kit

Unless, of course, a bargain falls into my lap. I now have a 4-year-old 114 on the bench with a 12th fret action > 4 mm. Based on the research we did, we think Outback Designs Guitar Neck Shims Durable Bolt-On Neck Plate for Guitar and Bass Repair Protective Guitar Neck Gasket Made from Flexible Nylon is the best overall. . they can dial it in to your preference in a short period of time. Bracing patterns, such as our new V-Class design, bring out each guitars unique voice. Faith Venus, O.M, High Gloss, with cutaway. The tech evidently wasn't a real Taylor tech. I eyeball the neck, and measure string height at 3 points on the neck if needed, then do appropriate adjustments to the neck and/or saddle. Lessons, Recordings, How Tos, Repair, Accessories, as a tech, automotive & guitar, one of the things i dread the most is having, if it required taking the saddle down, in order to get the action to within factory specs of, i was just wondering if it was a simple matter of setting the screws back in, the shim set for the BBT is quite different, in that there is only, Quote from: Earl on June 29, 2014, 06:38:26 PM, http://www.youtube.com/watch?v=-2XnmKePcUE#t=138, http://www.youtube.com/watch?v=wFVLRu9Np3w#t=312, http://www.youtube.com/watch?v=wFVLRu9Np3w#t=801, http://www.youtube.com/watch?v=e3Q6lJCh-1U, https://www.indiegogo.com/projects/the-jessica-malone-music-project#/, Quote from: michaelw on June 29, 2014, 10:23:11 PM, Quote from: cpugsie on June 30, 2014, 01:47:16 AM, Quote from: cpugsie on June 30, 2014, 10:44:48 AM, http://www.youtube.com/watch?v=DaSlSztC1aI#t=152, Quote from: Herb Hunter on June 30, 2014, 09:50:31 AM, with more frivolous trivia than most infomercials. Choosing the, Read More Electric Guitar Kits For Beginners For Sale (Jan 2023 Update)Continue, Are you looking for the Schecter Classic Electric Guitar? It turned out the Taylor neck was fine..it was my straight edge that wasn't straight. Are all Taylor dealers authorized to do these neck resets.The action is not as low as I like and I've got the truss rod as low as possible.I have a 95'712 that plays much better.The other I'm referring to is a 25thanniversary 414-RCE. I would never just try and sand the shims I have! For example, if you need some extra back tilt of the neck and remove a shim stamped "06" from the neck-to-body joint, then you would replace it with a shim stamped "04", slightly thinner than the original factory installed shim. Upon my request, Taylor sent me a set of shims for my Big Baby. we've, 3d printed neck shims in 2 and 1.5 degree. Lessons, Recordings, How Tos, Repair, Accessories, http://www.youtube.com/watch?v=e3Q6lJCh-1U, https://www.indiegogo.com/projects/the-jessica-malone-music-project#/, with more frivolous trivia than most infomercials. Sold comparable range in price from a low of $7.85 to a high of $146.14. guitar shim dimensions:shaped: 2-3/16 inch x 3 inch (55.56mm x 76.12mm)blank: 2-1/4 inch x 3 inch (57.15mm x 76.12mm)bass shim dimensions:shaped: 2-1/2 inch x 3-7/8 inch (63.50mm x 98.43mm)blank: 2-3/4 inch x 3-7/8 inch (69.86mm x 98.43mm)taper specs (approximate):0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm)0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm)1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm), Real wood neck shims, these are our thicker shim at about 1/16" to 1/8" thick, these are straight non-angled shims. FREE SHIPPING ON ORDERS $39.95+ FOR CUSTOMERS IN THE CONTIGUOUS US. Not sure the brass shims you describe on ebay will be genuine Taylor product. they came off of late '50's and early fenders. Changing Taylor shims an easy task? | Telecaster Guitar Forum Little did I know, it was more like a dogs hind leg than a straight edge. At some point, a guitar will need a neck angle adjustment. There is a ratio between the two that needs to be kept. w x 4 in. I've just dusted off my Taylor 214ce deluxe and been playing it for a change. fits standard fender neck pocket perfectly! for example; if you cut one in half, glue that half to a full siz. Learn More, We understand the importance of online privacy and are committed to complying with the EU General Data Protection Regulation. I have the same model and saw on Youtube the Taylor Factory Tour that the necks are shimmed but with a softer woody looking material ( probably is wood) according to the needs of the neck angle. Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. Haven't played it electrically yet. The shims are stamped with numbers of their sizes, and not all Taylors start off with the same shims. Chunkocaster, have you thought of contacting Taylor directly. The big problem here is that, as material has been removed from the neck heel, the neck moved a little deeper into the dovetail. Finishes. Taylor neck reset is quick and effective | The Canadian Guitar Forum 2. functionsthese shims worked well. its a 10 min job if that, then you can play the instrument, if it still doesn't suit you they can take 10 min again to change out another set of shims. 4. widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. they are approx. the ones we get Downunder are only sold at the "better" shops who will not accept anything less than first class. Guitar Shop 101: How to Shim a Bolt-On Neck - Premier Guitar I guess the first step is to see what shims are in the guitar currently. The guitar certainly has significant belly, but no evidence of broken braces. they are very thin, rough cut (not square) and not perfect. they are intended for a electric guitar neck pockets. Neck Shimming Made Easy Haze Guitars From what I've seen the shims are labeled in terms of 0.002" increments. Thanks, Muggy Electronics. size: 423.70.7cm/16.51.50.3inch. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. we use finely shaved real wood shims in our luthier shop and we chose to make them available for purchase in our store and online. Nov 7, 2022 Sharing what goes on with a 'TAYLOR' acoustic neck reset It is a bolt on neck system like Collings, Huss and Dalton and many other well made acoustics. Shop guitar parts online at Taylor Guitar's Taylorware store. and many players feel they lose tone unless firm contact is maintained between the neck and the body." those kinds of shims create an unwanted gap under the heel of the. The heel is inset, not flush, and the shims angled, therefore you will have no gaps, not even hidden ones. My luthier works out of his home shop and his attention to detail is amazing. New Engineering jobs added daily. It's not hard to cut a wedged wooden shim, or make one out of flat metal shim stock. I like the action on my acoustics lower than most and have a shaved bridge saddle to accomplish this. Taylor Acoustic Guitar Neck Reset DIY - Shims Replacement | Edwin-E Edwin-E 74.3K subscribers Subscribe 349 27K views 4 years ago I tried to do a neck reset on my Taylor 214ce acoustic. They are already shimmed as far as I know. we have various assorted dark woods and light woods available. Sold comparable range in price from a low of $7.85 to a high of $146.14. Our neck assembly process allows us to precisely control every neck angle's accuracy to .002 inch and makes it easy to make micro-adjustments if necessary. these shims are made from thin rosewood, walnut, mahogany, maple, spruce, or other assorted real woods. You can do it if you have some basic mechanical/guitar knowledge, and you're careful. material: brass. GS Mini action - and neck resets - The Acoustic Guitar Forum protect your favorite guitar from corrosion or damage. Was curious if they would sell a full shim kit to just anyone and what the cost would be. Please check the fields highlighted in red. Maple Acoustic Guitar Neck Shims - Set of 10. it is one of the best choices for you. we find them very useful for custom neck projects and repairs. attention repair shops: making a quality shim takes time. What's the correct way to shim a neck? I'm still getting used to the guitar and need to go through a couple string changes with the old and new bridge saddle before I make any real assessment. I put an off-the-shelf bone saddle in it, and it brought the good string break angle back. Perfect shims for a perfect neck fit. the action) to be set low, which makes it easier to fret the strings and form chords. Broadfix 1.13 in. We have done a lot of research to find the top 20 Taylor Guitar Neck Shims available. Their repair man has been there over 20 years so I reluctantly left the guitar for the neck reset, new saddle, etc. add to list. Guitars with a unique musical personality, including 12-string, 12-fret, nylon, baritone and travel. w x 4 in. StewMac Neck Shims for Guitar - StewMac we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! It is made of material for long time and durable use. Went to an established, privately owned music store that sells mostly Taylor guitars. a stock angled shim may not match the an. The type of wood used for a guitars soundboard has a major impact on its tonal properties. EUR those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. Our elegant cutaways add to a guitars shapeliness and broaden your playing range. for example; if you cut one in half, glue that half to a full size shim, sand the middle edge, you now have a graduated shim to adjust neck angle. The DVD was a nice touch for sure. Then your "gap" worries are taken care of, now that I see how their system works. they are approx. are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? for each single auction purchase the buyer, About the product 1. high quality materialguitar neck shims are made of high quality solid brass material for durable use to match the guitar neck. our professional guitar neck shim must meet you needs. Go slowly and carefully a few strokes at a time with 240 grit sandpaper or even finer. Choosing the Taylor Guitar Neck Shims can be difficult as there are so many considerations, such as Taylor, WD Music, Charvel, Schaller, Stewart-MacDonald, Gotoh. attention repair shops: making a quality shim takes time. Keep these on hand for a quick turnaround on this common repair. Tools by outback designs. If so, youve come to the right place. Taylor Armrests. if you need a thicker shim, they can be glued together, layered, graduated, and or sanded for your needs. Neck Shims for an NT neck. Taylor hides these like they are the Many people could use a set of summer (thinner) shims for damp weather, and a thicker set of winter shims for dry conditions. If so, youve come to the right place. Oops, looks like you forgot something. I'm sure this is why there are different opinions on the ES2! Real wood neck shims. You can trim along the lasered line to fit the shim to a pocket with a flat heel, like a Tele. You must log in or register to reply here. Several ukulele and bass guitars too. I was considering trying to find some of the ultra precise Taylor shims to reset the neck on my 110, but the more I read up on it, the harder it looks. If I understand you, you are keeping the standard height at the fretboard, and installing a taller bridge? General Acoustic Guitar and Amplification Discussion. dimensions: 2-1/4 inch x 3 inch (57.15mm x 76.12mm) taper specs (approximate): 0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm) 0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm) 1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm). I know Stewmac sells shims but I wanted shims made specifically by Taylor for my 310. Your purchases also help protect forests, including trees traditionally used to make instruments. Shimming. This educational content is not intended to be a substitute for professional advice. A setup was included with my DN3 when I bought it. gerry@hazeguitars.com +353 (0)87 9966439. If so, youve come to the right place. we offer reasonably priced real wood neck shims. Each acoustic series boasts a unique package of visual details that enhance the aesthetic appeal. Every Day new 3D Models from all over the World. we also have thinner wafer shims at approximately 1/40" available. no questions asked! the shaped shims fit most neck pockets with a rounded heel. 1999 Baby Taylor 301 Top Fix Neck shim repair Lockdown Guitars 114 views 5 months ago Taylor Guitars' Perfect Neck Angle - Talk About Taylor Taylor Guitars 65K views 10 years ago. Original 1960's fender neck shim to help get your guitar set up how you like. with these bolt-on shims, that work is done for you. 2023 Price List. 6,000+ Engineering jobs in Paris, le-de-France, France (326 new) Hey! They said there is no specific torque that its all done by hand. stop using garbage for neck shims. Taylor isn't going to sell you the shims, and besides that, you need a tech who has a good collection of them in all the different sizes, both vertical and horizontal, in order to evaluate which ones it needs to be optimum. Copyright 2012-2022 TAYLOR-LISTUG, INC. All Rights Reserved "neck shim" 3D Models to Print - yeggi I'm not trying to avoid the cost of a reset because I'm cheap, I really like working on my own instruments and have the experience to do it. Taylor Guitars NT Neck Reset - Guitar Repair Long Island Taylor does not make these shims available to anybody but authorized Taylor retailers or repair facilities. Taylor only manufactures guitars in El Cajon, California and Tecate, Mexico. Thanks to great customer service support of Taylor guitars for their communication about this problem and eventually sending the shims. 2. functionsthese shims worked well to elevate and angle the neck in order to give more adjustability to the bridge and to help make the setup more in line with your playing preferences. Copyright 2012-2022 TAYLOR-LISTUG, INC. All Rights Reserved Taylor Customer Support - Acoustic Guitars - Harmony Central Shaped shims fit most neck pockets with a rounded heel. Understanding Model Numbers. keep these on hand for a quick turnaround on this common repair. #Bedroom Level# Tube Amp, Is it possible. however, these are not "ready to go, drop in" as with other "commercial" wood neck shims, but they are much less expensive. I think that is crazy. Based on your location, we've changed your settings: Shipping Region: Heavy-duty nylon guitar shim our bolt-on neck shims for guitars have been expertly crafted using high-end flexible nylon plastic. Your purchases help youth music programs get the gear they need to make music. I just backed each one off by two complete turns and did the same going back in. protect your favourite guitar from corrosion or damage. they are intended for a electric guitar neck pockets. Set of six neck Shims for adjusting neck height for Taylor Guitar Baby Taylor. This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge. thickness: 0.2mm, 0.5mm, 1mm. we offer reasonably priced real wood neck shims. 0.5-degree taper is the one you'll reach for most often it works great on fender and many other solidbody guitars. essentials: this is a must-have for people who often play the guitar and need parts for quick and easy repairs. Taylor Guitars, 1980 Gillespie Way, El Cajon, CA 92020. Low maintenance carbon fiber guitars are my "thing" these days, but I will always keep the koa 424. these shims are widely used in the glazing and wall covering industries due to their high compressive strength and easy stacking. So far its worked perfectly well. as dan erlewine describes in his guitar player repair guide: "this gap may cause an upward kink in the neck. We'll see what happens. features , Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. Guitar Parts | Taylor Guitars those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. If so, youve come to the right place. Dimensions: brass spacers of 3 thickness sizes: 0.2 mm x 2, 0.5 mm x 1, 1 mm x 1, it is a must-have tool for electric guitar bass players. length: 4 in. I tried to do a neck reset on my Taylor 214ce acoustic electric guitar. Acoustic vs Electric Guitars: Beginner Advice. widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. if yes, look no further! Ill report back. I am unfamiliar with bolt neck acoustics, but if it it user removable, you can just take it off, take a look at how it's put together, and engineer something yourself. gender: male. 0.25-degree shim offers the most versatility. you must buy them all together. New Paris, le-de-France, France jobs added daily. we've seen everything from matchbook covers to guitar picks stuck in neck joints. No torque wrench. 2.due to the manual measurement and different measurement methods, please allow 1-3mm deviation. dan creates tapered shims that cover the entire heel of the neck. width: 1.13 in. I suspect that when you call, Taylor will say "shims are available only to certified techs" because they don't want ham-fisted owners messing up the neck set, metal screw inserts, etc. Troisnoir, I have done a little bit of repair work, (shimmed the neck, truss rod, bridge work) and found raising or lowering the height off the fretboard does indeed affect tone. dimensions: 2-1/2 inch x 3-7/8 inch (63.50mm x 98.43mm) taper specs (approximate): 0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm) 0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm) 1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm). Description are you looking for a professional, yet affordable guitar neck shim? PDF Taylor Guitars Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape. size: the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(4pcs), 0.5mm(2pcs) and 1mm(2pcs), necessary luthier tools for electric guitar bass players. 1-degree taper is great for basses with a post mounted bridge. If so, youve come to the right place. Thanks for the replies so far. Robert Taylor explains it well. The necks are held on by a bolt from memory? they are intended for a electric guitar neck pockets. these shaped shims fit most neck pockets with a rounded heel. protect your favourite guitar from corrosion or damage. for each single auction purchase the buyer will receive a total of 15 shims. they will need to be trimmed and or neck holes drilled to fit your project. perfect for guitar repair whether you're installing a new sized bridge or simply repairing the neck, our guitar neck shims are designed to fit onto most electric guitars and basses. commercial neck shims, Size: 2 1/4" x 3 1/8" five shims the auction is for 5 thin rosewood neck shims, these are straight non-angled shims. the last photo is of a fender neck that was removed for the 1st time since new shows the factory installed shim (you do not get that one). Tanglewood TW40 Sundance Historic, 12 freter. Guitar Necks | Taylor Guitars He's got contacts at Taylor and can get the actual parts needed; I'd just prefer to work with him as the Taylors I own are all second hand and don't qualify for the lifetime warranty stuff. Once you've sanded the shim into a subtle wedge and smoothed the top, it's time to punch holes to accommodate the four neck screws. as dan erlewine describes in his guitar player repair guide: "this gap may cause an upward kink in the neck. If it's always been like that, sure, but most acoustic guitars across all brands do require a neck reset at some point as the body distorts over time. these guitar neck gaskets are also a great gift idea for any guitar player. AGF sponsor Marc Babin/Babin Guitar Repair is an authorized Taylor repair center. Traditional guitar necks lose support at the body joint, relying on a fingerboard extension that is glued directly to the top. better than the typical homemade "guitar pick" neck joint shims, these tapered shims cover. You can do it if you have some basic mechanical/guitar knowledge, and you're careful. all five layered together give a thickness of about 1/8". as dan erlewine describes in his guitar player, Real wood neck shims, these are our thicker shim at about 1/16" to 1/8" thick, these are straight non-angled shims. So, the neck part of the joint is now a little loose when it's inserted into the the dovetail socket in the guitar. To see them clearer click on the big photo:hard to find. You'll have to remove the paper label covering the bolts. Thank you.This video may contain cover of the song written by somebody else. Great Tone Taylor Acoustic Guitar Neck Reset DIY - Shims Replacement - YouTube Germany, I would have no doubts about putting in a matched set of shims to attain the desired result myself if I were to have an official set of shims. commercial neck shims are very expensive. I understand that in some cases Taylor will send shims along with an installation video. 2 1/4" by 3 1/8" and about 1/16"-1/8" thick. Taylor Owners, have you shimmed your neck? What did you use? you get the 4 you see here. Original 1960's fender neck shim to help get your guitar set up how you like. age group: adult. It plays fine, but I have been under the impression that increasing the break angle will give me more volume, and maybe better tone. Subscribe now for emails with guitar giveaways and prizes, cool deals, guitar news and more from Taylor Guitars! Resources. Made of solid metal to match the guitar neck. For decades, Taylors easy-playing guitar necks have stood alone as the gold standard of playing comfort in the acoustic guitar world. Leverage your professional network, and get hired. Neck Shims for an NT neck. On a customer's 214E today, it took me no more than 1/2 hour to do a neck reset! If so, youve come to the right place. we guarantee the style is the same as shown in the pictures. The Taylor shims are laser cut and are indexed to the thousandths of an inch. This will give support to my channel and allows me to continue creating videos. Ya, I don't do a straight edge test either. Thanks all. By clicking Subscribe, I agree to receive exclusive offers & promotions, news & reviews, and personalized tips for buying and selling on Reverb. Are you looking for the Taylor Guitar Neck Shims? stacking them will let you really dial in the neck angle you're after. FREE SHIPPING ON ORDERS $39.95+ FOR CUSTOMERS IN THE CONTIGUOUS US. Our neck joint was designed with serviceability in mind. By continuing to use Reverb, you agree to these updates, and to our cookie policy. they will need to be trimmed and neck holes drilled to fit your project. T5 Neck Shim - The Acoustic Guitar Forum Our inspired proprietary pickups faithfully reproduce the natural nuances of a Taylor guitars voice. It definitely improved the tone and volume, but now the action is high again. compact and lightweight, easy to install. But why taper it and not fold some card over? Each Taylor body shape yields a distinctive tonal personality. Choosing the Taylor Guitar Neck Shims can be difficult as there are so many considerations, such as Taylor, WD Music, Charvel, Schaller, Stewart-MacDonald, Gotoh. Thanks in advance. Free shipping lower 48. Ingenious! as dan erlewine describes in his guitar player repair guide:"this gap may cause an upward kink in the neck. The remainder of the reset generally follows pretty similar steps, though, and involves the same modifications to the heel. They can do it quickly and easily. The shims are sitting in the joints - you can change different thickness shims to adjust the neck angle. From a sleek, hand-friendly profile to a neck joint design that connects the neck to the body with incredible precision, you can count on supreme playability. Unless CTGull lived next door to me, I have no plans to buy anymore set neck guitars. Material: the guitar neck gasket is made of high-quality solid brass material, which is strong and durable, and matches the guitar neck. r/Luthier on Reddit: Neck shims Real wood neck shims. specification: br material: brass br thickness: 0.2mm, 0.5mm, 1.0mm br br feature: br used to change the angle at which the bolt fixes the guitar neck br carry these gaskets with you for quick turnaround during this common repair br br package contains: (4 hard gaskets) br 0.2mm * 2 br 0.5mm * 1 br 1.0mm * 1, High quality material:guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck. Mine's low too and it still sounds good. Baby Taylor (Factory) Neck Shims | Reverb Welcome Guest. Find a Dealer. From what I've seen the shims are labeled in terms of 0.002" increments. That may or may not be true. Place the shim into the neck pocket with the shaded side down. made of solid maple to match the guitar neck. In the first year that the Big Baby became available I bought one and my guitar repairman determined that it required a different shim. Good additional info everyone. The average cost is $27.48. Sales person said it was normally $30 to do the job.. that sounds a little too cheap. note: each trio of shims includes 3 different tapers for changing the pitch of any bolt-on neck: 0.25-degree, 0.5-degree, and 1-degree. Anyone know if the NT necks shims are available for purchase anywhere? those kinds of shims create an unwanted gap under the heel of the neck, dead airspace where humidity condenses to swell the wood. I need to be able to raise the saddle an 1/8 or so to get a better break angle on the strings. It's an integral part of the guitar and i would never consider making a diy shim for that - you'd be un-doing all the great engineering that went into the NT neck design. 5. satisfaction guarantee: we stand by our quality commitment and will guarantee you 100% satisfaction of the guitar neck shims. The average cost is $27.48. material: brass. details:outback designs nylon guitar neck shims. The Taylor NT guitar neck is built from a continuous piece of wood that supports the ebony fretboard all the way up to the 19th fret and sits securely in a custom-fit pocket that is inset with laser-cut spacers. Taylors eco-friendly, UV-curable finishes protect your guitar and keep it looking and sounding great. Go to topic listing Home Forums Play Acoustic Guitars Taylor Customer Support those kinds of shims create an unwanted gap under, To see them clearer click on the big photo:hard to find. they could. Be sure it's oriented so the thicker end of the wedge faces the bridge. The Taylor was the least affected but the only one worth having a reset. are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? I understand the concern, but in this case it's not a case of aptitude but rather local guitar shop politics. Initially, he turned kind of pale and looked concerned, but once i explained what I was doing, and that I've been a repairman for several decades, he relaxed, and told me to email him, he'd send me some shims, no problem. I have a 2006 GS, and I'd like to install a slightly higher saddle to improve tone, but I don't want the action that high. features material: copper. Sigma GWCE-3 O.M. it is one of the best choices for you. I started searching for one last night and found that a certain GC in my area was listed as a Taylor repair location. taylor neck shims | AcousticGuitarCabin - ProBoards Remove the strings, then carefully remove the neck. For a better experience, please enable JavaScript in your browser before proceeding. Acoustic Guitar Features.

House Joint Resolution 192 48, 48 112, Shooting In Staten Island, Articles T